Multifacet holographic optical elements

New types of holographic optical elements, combining the flexibility of computer generated holograms with the large space bandwidth product and high diffraction efficiency of interferometrically recorded volume phase holograms, are demonstrated. The optical elements are recorded by subdividing a volume hologram film surface into numerous small areas (facets), each of which is individually exposed under computer control. Each facet is used to produce a portion of the desired final wavefront. Three different optical elements are demonstrated

Remote sensing of land use and water quality relationships - Wisconsin shore, Lake Michigan

This investigation assessed the utility of remote sensing techniques in the study of land use-water quality relationships in an east central Wisconsin test area. The following types of aerial imagery were evaluated: high altitude (60,000 ft) color, color infrared, multispectral black and white, and thermal; low altitude (less than 5000 ft) color infrared, multispectral black and white, thermal, and passive microwave. A non-imaging hand-held four-band radiometer was evaluated for utility in providing data on suspended sediment concentrations. Land use analysis includes the development of mapping and quantification methods to obtain baseline data for comparison to water quality variables. Suspended sediment loads in streams, determined from water samples, were related to land use differences and soil types in three major watersheds. A multiple correlation coefficient R of 0.85 was obtained for the relationship between the 0.6-0.7 micrometer incident and reflected radiation data from the hand-held radiometer and concurrent ground measurements of suspended solids in streams. Applications of the methods and baseline data developed in this investigation include: mapping and quantification of land use; input to watershed runoff models; estimation of effects of land use changes on stream sedimentation; and remote sensing of suspended sediment content of streams. High altitude color infrared imagery was found to be the most acceptable remote sensing technique for the mapping and measurement of land use types

Land use and pollution patterns on the Great Lakes

The author has identified the following significant results. The final mapping of the large watersheds of the Manitowoc and the Oconto was done using the 25% sampling approach. Comparisons were made with earlier strip mapping efforts of the Oconto and Manitowoc watersheds. Regional differences were noted. Strip mapping of the Oconto resulted in overestimation of the amount of agricultural land compared to the random sampling method. For the Manitowoc, the strip mapping approach produced a slight underestimate of agricultural land, and an overestimate of the forest category

Skylab imagery: Application to reservoir management in New England

The author has identified the following significant results. S190B imagery is superior to the LANDSAT imagery for land use mapping and is as useful for level 1 and 2 land use mapping as the RB-57/RC8 high altitude imagery. Detailed land use mapping at levels 3 and finer from satellite imagery requires better resolution. For evaluating factors that are required to determine volume runoff potentials in a watershed, the S190B imagery was found to be as useful as the RB-57/RC8 high altitude aircraft imagery

The "zeroth law" of turbulence: Isotropic turbulence simulations revisited

The dimensionless kinetic energy dissipation rate C_epsilon is estimated from numerical simulations of statistically stationary isotropic box turbulence that is slightly compressible. The Taylor microscale Reynolds number Re_lambda range is 20 < Re_lambda < 220 and the statistical stationarity is achieved with a random phase forcing method. The strong Re_lambda dependence of C_epsilon abates when Re_lambda approx. 100 after which C_epsilon slowly approaches approx 0.5 a value slightly different to previously reported simulations but in good agreement with experimental results. If C_epsilon is estimated at a specific time step from the time series of the quantities involved it is necessary to account for the time lag between energy injection and energy dissipation. Also, the resulting value can differ from the ensemble averaged value by up to +-30%. This may explain the spread in results from previously published estimates of C_epsilon.Comment: 7 pages, 7 figures. Submitted to Phys. Rev.

Arctic and subarctic environmental analyses utilizing ERTS-1 imagery

The author has identified the following significant results. ERTS-1 imagery provides a means of distinguishing and monitoring estuarine surface water circulation patterns and changes in the relative sediment load of discharging rivers on a regional basis. Physical boundaries mapped from ERTS-1 imagery in combination with ground truth obtained from existing small scale maps and other sources resulted in improved and more detailed maps of permafrost terrain and vegetation for the same area. Snowpack cover within a research watershed has been analyzed and compared to ground data. Large river icings along the proposed Alaska pipeline route from Prudhoe Bay to the Brooks Range have been monitored. Sea ice deformation and drift northeast of Point Barrow, Alaska have been measured during a four day period in March and shore-fast ice accumulation and ablation along the west coast of Alaska have been mapped for the spring and early summer seasons

A de-dusting device for removing fines from pellets, granules and coarser powders

Customers buying materials in granular form dislike the fact that the delivered materials contain any dust, which can lead to poor product quality, a poor working envi-ronment, or even to handling hazards. In granular filters the filter media can be re-used several times if the accumulated dust can continuously be removed outside the filter.The results of both de-dusting LDPE pellets, and of an artificially made contaminated sand, using a device designed and developed at the Telemark Technological R&D Centre, show that the device performs efficiently in both cases, although further development is still necessary

Inertial range scaling in numerical turbulence with hyperviscosity

Numerical turbulence with hyperviscosity is studied and compared with direct simulations using ordinary viscosity and data from wind tunnel experiments. It is shown that the inertial range scaling is similar in all three cases. Furthermore, the bottleneck effect is approximately equally broad (about one order of magnitude) in these cases and only its height is increased in the hyperviscous case--presumably as a consequence of the steeper decent of the spectrum in the hyperviscous subrange. The mean normalized dissipation rate is found to be in agreement with both wind tunnel experiments and direct simulations. The structure function exponents agree with the She-Leveque model. Decaying turbulence with hyperviscosity still gives the usual t^{-1.25} decay law for the kinetic energy, and also the bottleneck effect is still present and about equally strong.Comment: Final version (7 pages